1. Cheng Tang, You-Chao Yang, Peng-Zhan Liu, YJ Kim, “Prediction of abrasive and impact wear due to multi-shaped particles in a centrifugal pump via CFD-DEM coupling method”,

Energies, Vol. 14, No. 2391, pp. 1-15, 2021.4.23 [SCI 2.262]

2. Seungsoo Jang, Yeong Wan Je, YJ Kim, “Effect of Blade Leading and Trailing Edge Configurations on the Performance of Micro Tubular Propeller Turbine Using Response Surface Methodology”,

Applied Sciences, Vol. 11, No. 5596, pp. 1-17, 2021.  [SCI 2.474].

3. Yun-Seok Choi, YJ Kim, “Effect of Magnetic-nano Fluids on the Performance of A Fin-tube Heat Exchanger”,

Applied Sciences, Vol. 11, No. 9261, 2021 [SCI 2.474].

4.  Ji-Hun Song, Seong-Woong Kang, YJ Kim, “Optimal Design of the Disc Vents for High-Speed Railway Vehicles Using Thermal-Structural Coupled Analysis with Genetic Algorithm",

Proceedings of the Institution of Mechanical Engineers, Part C-Journal of Mechanical Engineering Science, Vol. , No. , , 2021 [SCI 1.897].

 

 

 

2020

1. M. Lee, and YJ Kim, “Effect of non-uniform magnetic fields on the characteristics of ferrofluid flow in a square enclosure.”

Journal of Magnetism and Magnetic Materials, Vol. 506, 166697, 2020.

2. JW Lee, KJ Jung and YJ Kim, “Numerical analysis on performance of induced gas flotation machine using MUSIG model,”

Engineering Applications of Computational Fluid Mechanics, Vol. 14, No. 1, pp. 778-789, 2020.

3. Hyeon-Seok Seo, ,In-Ju Hwang and YJ Kim, “Interferometric Study of the Heat Transfer Phenomena Induced by Rapid Heating of Nickel Sheet”

Applied Sciences, 10(13), 4658, 2020.

4. Jin, J. M., Jung, K. J., Kim, Y. H., & Kim, Y. J. "Effects of gap between impeller and volute tongue on a pressure fluctuation in double-suction pump"

Journal of Mechanical Science and Technology, Vol.34, 1-7, 2020.

5. YJ Kim and Jong-Chul Lee, "Computations on the Thermal Characteristics of SF6 and CO2 Switching Arcs on a Microscopic Scale",

J. of Nanoscience and Nanotechnology. Vol. 20, pp. 7201-7205, 2020. [SCI 1.338].

6. Cheng Tang, YJ Kim, “CFD-DEM Simulation for Distribution and Motion Feature of Solid Particles in Single-channel Pump“, 

 

 

2019

1. MW Lee, YJ Kim, “Thermomagnetic Convection of Ferrofluid in an Enclosure Channel with an Internal Magnetic Field”, 

Micromachines, Vol. 10, No. 553, pp. 1~8, 2019.8 [SCI 2.22].

2. Youngwan Kim, Myoungwoo Lee and YJ Kim, “Selective Growth and Contact Gap-Fill of Low Resistivity Si via Microwave

Plasma-Enhanced CVD”, Micromachines, Vol. 10, No. 10, 689, pp. 1~8, 2019.10 [SCI 2.22].

3. YJ Kim and Jong-Chul Lee, “Quasi-Three-Dimensional Computations of the Microscopic Thermal and Dielectric Characteristics

of an SF6 Rotating Switching Arc”, J. of Nanoscience and Nanotechnology. Vol. 19, No. 10, pp. 6785-6790 [SCI 1.338].

4. KJ Jung, IJ Hwang, YJ Kim, "Effect of Inner Wall Configurations on the Separation Efficiency of Hydrocyclone", J. of

Mechanical Science and Technology, Vol. 33, No. 11, pp. 5277-5283, 2019. [SCI 1.221].

5. Yo-Hwan Kim, Myoungwoo Lee, In-Ju Hwang, and YJ Kim, “Noise Reduction of an Extinguishing Nozzle Using the

Response Surface Method“, J. of Energies, Vol. 12, No. 4346, pp. 1-13, 2019.12 [SCI 2.262]

 

 

2018

1. Ji-Gu Lee, YJ Kim, “Performance Evaluation of Cleaning Energy of An Induced Gas Flotation Machine Using

Multiple-Size-Group (MUSIG) Model”, Energy Procedia, Vol. 142, pp. 3460-3467 [국제B].(ISSN 1876-6102)

2. Yeon-Ho Lee, Hyun-Oh Kim and YJ Kim, “Structural Characteristics of a Conical-Frustum-Patterned Stretchable Heater in an

External-Force Environment”, J. of Nanoscience and Nanotechnology. Vol. 18, No. 9, pp. 6606-6610 [SCI 1.338].

3. Won-Ho Lee, YJ Kim and Jong-Chul Lee, “Interaction Model Between an Electrical Arc and a Material for Arc Discharge

Synthesis of Metal Nanoparticles“, J. of Nanoscience and Nanotechnology. Vol. 18, No. 09, pp. 6611-6614 [SCI 1.338].

4. YJ Kim and Jong-Chul Lee, “Two-Dimensional Computations on the Thermal Behaviors between Arc Plasmas and Their

Electrodes for the Switching Chamber Design”, J. of Nanoscience and Nanotechnology. Vol. 18, No. 09, pp. 6624-6628

[SCIE 1.338].

5. Hyun-Oh Kim, Yeon-Ho Lee, YJ Kim, ∗Structural Stability of the Serpentine-Patterned Micro Electrode Under the Influence of

External Forces“, Science of Advanced Materials, Vol. 10 , No. 7, pp. 1018-1023, 2018. [SCI 2.598].

6. M Lee, HO Kim, JH Boo, YJ Kim, “Thermo-mechanical characteristics of the stretchable serpentine-patterned microelectrode”,

Functional Materials Letters, Vol. 11, No. 3, pp. 1850054-1~1850054-4 [SCI 1.234].

7. Jae-Hee Kim, Hyeon-Seok Seo, YJ Kim, “Thermal-flow Characteristics of Ferrofluids in a Rotating Eccentric Cylinder under

External Magnetic Force”, Micromachines, Vol. 9, No. 457, pp. 1~8, 2018.9 [SCI 2.22].

8. Hak-Sun Kim, Yo-Hwan Kim, In-Ju Hwang and YJ Kim, “Numerical Study on Noise Reduction of Gas Extinguishing Nozzle

Using Adsorbent“, Int. J. of Engineering & Technology, Vol. 7, No. 3.33, pp. 152-156, 2018.9 [SCOPUS, 국제B].

(ISSN 2227-524X).

 

 

2017

1. Yeon-Ho Lee, Nae-Eung Lee, Sung-Min Kim and YJ Kim, “Exothermic Performance of a Mogul-Patterned Stretchable Micro

Heater with Various Geometrical Configurations”, J. of Nanoscience and Nanotechnology., Vol. 17, No. 10, pp. 7502-7506,

[SCI 1.338].

2. In-Yeob Song, Seung-Ki Choi and YJ Kim, “Optimal Design of a Sheath Flow Nozzle for Detecting Biological

Warfare Agents“, J. of Nanoscience and Nanotechnology. Vol. 17, No. 11, pp. 8360-8364 [SCI 1.338].

3. Won-Ho Lee, YJ Kim and Jong-Chul Lee, “Numerical Simulation on Arc Discharge and Anode Sublimation for Nanoparticle
ynthesis”, J. of Nanoscience and Nanotechnology. Vol. 17, No. 11, pp. 8365-8368, 2017 [SCI 1.338].

4. Sun-Seok Byeon, Jae-Young Lee and YJ Kim, “Performance Characteristics of a 4*6 Oil-Free Twin-Screw Compressor“, J. of Energies. [SCI 2.262]

 

 

2016

1. Hyeon Jin Seo, Sang-Jin Cho, H. Kim, YJ Kim, and Jin-Hyo Boo, “Device Characteristics and Mechanical Flexibility

Simulation of Plasma-Polymer Gate Dielectrics Based Organic Thin Film Transistors”, Science of Advanced Materials, Vol. 8,

pp. 665-668, 2016.3 [SCI 2.598].

2. Han-Byeol Lee, Chan-Wool Bae, Le Thai Duy, Il-Yung Sohn, Do-Il Kim, You-Joon Song, YJ Kim, and Nae-Eung Lee,

“Mogul-Patterned Elastomeric Substrate for Stretchable Electronics”, Advanced Materials, Vol. 28, pp. 3069-3077.[SCI 17.493]

3. Hyun-Su Kang and YJ Kim, “A Study on the Multi-Objective Optimization of Impeller for High-Power Centrifugal

Compressor”, Int. J. of Fluid Machinery and Systems, Vol. 9, No. 2, pp. 143-149, 2016. 4. [국제B].

4. Sung-Min Kim, HS Seo, YJ Kim, "A Study on the Flow Characteristics of Oil-Based Ferrofluid with Magnetic Nanoparticles

in the Patterned Microchannel under Magnetophoresis", J. of Nanoscience and Nanotechnology, Vol. 16, pp. 10951-10958,

2016 [SCI 1.563].

5. Yi-Seul Jo, Jong-Chul Lee, YJ Kim, “Effects of Optical Cell Configuration on the Screening Performance of a

Bio-Fluorescence Sensor”, J. of Nanoscience and Nanotechnology, Vol. 16, pp. 11490-11493, 2016. [SCI 1.563].

6. Hyun-Su Kang, YJ Kim, “Optimal Design of Impeller for Centrifugal Compressor Under the Influence of One-way

Fluid-Structure Interaction”. J. of Mechanical Science and Technology, Vol. 30, No. 9, pp. 3953-3959, 2016. [SCI 0.838].

7. Yeon-Ho Lee, YJ Kim, “Mechanical Characteristics of Stretchable Electronics Based on a Mogul-Patterned Structure”,

Functional Materials Letters. Vol. 9, No. 6, pp. 1642012-1~1642012_4, 2016. 12 [SCI 1.333].

8. Kim, J.H., Han, S. M., YJ Kim, “Safety estimation of high pressure hydraulic cylinder using FSI method”, J. of Drainage

and Irrigation Machinery Engineering, Vol. 34, No. 5, pp. 418-423, 2016.5. [국제B](ISSN 1674-8530)．

(JH Kim, YJ Kim, "Safety Estimation of High Pressure Hydraulic Cylinder Using FSI Method", (ICPF 2015), 7th International Conference on
umps and Fans, 2015, 2015.10.18.-10.21, Hangzhou, China.)

 

 

2015

1. SS Byeon, MY Cho, JC Lee, and YJ Kim, “Numerical Study on the Particle Trajectory Tracking in a Micro-UV Bio-Fluorescence Sensor”,
. of Nanoscience and Nanotechnology, Vol. 15, No. 3, pp. 2221-2225, 2015 [SCI 1.563].

2. CK Hong, YH Na, HS Uhm, and YJ Kim, “Effects of Mass Flow Rate on the Thermal-Flow Characteristics of Microwave CO2 Plasma”,

J. of Nanoscience and Nanotechnology, Vol. 15, No. 3, pp. 2338-2341, 2015 [SCI 1.563].

3. Hyeon-Seok Seo, Jin-Hyo Boo and YJ Kim, “Magnetophoresis Effects on the Flow Characteristics of Oil-Based Ferrofluids in

Rectangular Enclosures”, J. of Nanoscience and Nanotechnology, Vol. 15, No. 10, pp. 7451-7456, 2015 [SCI 1.563].

4. Won-Ho Lee, YJ Kim, Jong-Chul Lee, “Temperature Prediction in a Free-Burning Arc and Electrodes for Nanostructured Materials and Systems”,

J. of Nanoscience and Nanotechnology, Vol. 15, No. 11, pp. 8446-8450, 2015 [SCI 1.563].

5. HS Seo, JH Boo, and YJ Kim, “Thermomagnetic Convective Flow Characteristics of Oil-Based Magnetic Nanofluids in the

Rectangular Enclosure”, J. of Nanoscience and Nanotechnology, Vol. 15, No. 11, pp. 8601-8607, 2015 [SCI 1.563].

6. Hak-Jun Kim and YJ Kim, “Thermal Characteristics of Amorphous Indium_Gallium_Zinc-Oxide and Graphite in Display Panel

Based TFTs”, J. of Nanoscience and Nanotechnology, Vol. 15, No. 11, pp. 8971-8976, 2015 [SCI 1.563].

7. Ki-Hwan Hwang, Byung-Chang Kang, Duk Young Jung, YJ Kim & Jin-Hyo Boo, “Micropatterning of TiO2 Thin Films by

MOCVD and Study of Their Growth Tendency”, Scientific Reports, Vol. 5: 9319, pp. 1-7, 2015. 3 [SCI 5.08].

 

 

2014

1. HS Seo, YJ Kim, "Effect of Electrode Positions on the Mixing Characteristics of an Electroosmotic Micromixer",

J. of Nanoscience and Nanotechnology, Vol. 14, pp. 6167-6171, 2014.03 [SCI 1.563].

2. Byeong-Ung Hwang, Do-Il Kim, Sung-Won Cho, Myeong-Gu Yun, Hak Jun Kim, YJ Kim, Hyung-Koun Cho, Nae-Eung Lee,

“Role of ultrathin Al2O3 layer in organic/inorganic hybrid gate dielectrics for flexibility improvement of InGaZnO thin film

transistors”, Organic Electronics, Vol. 15, pp. 1458-1464, 2014.04 [SCI 3.84]

3. HS Seo, JC Lee, IJ Hwang, and YJ Kim, “Flow Characteristics of Ferrofluid in a Microchannel with Patterned Blocks”,

Material Research Bulletin, Vol. 58, pp. 10-14, 2014.08 [SCI 1.913]

4. HJ Kim, YJ Kim, "Effect of Al2O3 Insulator Thickness on the Structural Integrity of a-IGZO based TFTs",

J. of Nanoscience and Nanotechnology, 2013 Nano Korea, Vol. 14 , No. , pp.1-5, 2014 [SCI 1.563].

5. HJ Kim, YJ Kim, "Influence of External Forces on the Mechanical Characteristics of the a-IGZO and Graphene Based

Flexible Display", Materials Science and Engineering, Vol. 62, No. 1, pp. 012022, 2014.08.01 [국제B] (1757-899X).

6. HS Seo, JC Lee, YJ Kim, “Magnetic field and thermal characteristics simulation of axial magnetic field contacts in the vacuum interrupter”,

Japanese Journal of Applied Physics, Vol. 54, pp. 01AC02-1~5, 2015 [SCI 1.067]. 

 

 

2013

1. M. Bhuvaneswari, S. Sivasankaran, YJ Kim, “Lie Group Analysis of Radiation Natural Convection Flow over an Inclined

Surface in a Porous medium with Internal Heat generation”, J. Porous Media, Vol. 15, No. 12, pp. 1155-1164, 2013

[SCI 0.707].

2. YJ Kim and JC Lee, "Comparison of Turbulence Models for a Free-burning High-intensity Argon Arc", J. of the Korean

Physical Society, Vol. 62, No. 9, pp. 1252∼1257, 2013.5 [SCI 0.506].

3. S.-S. Byeon, J.-H. Boo, J.-Y. Park, Sungsoo Kim, YJ Kim,“Numerical Study on the Flow Characteristics of Low Head Small

Hydraulic Turbine“, Advanced Materials Research, Vols. 732-733, pp. 436-442, 2013.6 [국제B].(ISSN: 1662-8985).

4. Daewoo Lee, Sung-Wook Cho, YJ Kim, "Numerical Study on the Heat Dissipation Characteristics of High-Power LED

Module", Science China Technological Sciences, Vol. 56, No. 9, pp. 2150-2155, 2013.7.24 [SCI 0.747].

5. BJ Kim, IJ Hwang, YJ Kim, "Effect of Nozzle Tip Configuration on the Micro-droplet Formation",

J. of Nanoscience and Nanotechnology, Vol. 13, pp. 8059-8063, 2013.9 [SCI 1.563].

6. S.-S. Byeon, YJ Kim, "Influence of Blade Number on the Flow Characteristics in the Vertical Axis Propeller Hydro Turbine",

Int. J. of Fluid Machinery and Systems, Vol. 6, No. 3, pp. 144-151, 2013.9 [국제B].

7. YJ Kim and JC Lee, "Numerical analysis of free-burning argon arcs based on the local thermodynamic equilibrium model at

various electrical currents", Thin Solid Films, Vol. 547, pp. 28-31, 2013 [SCI 1.89].

8. DS Kim, BT Han, YJ Kim, "Degradation Analysis of Secondary Lens System and Its Effect on Performance of LED-based

Luminaire", Microelectronics Reliability, Vol. 54, pp. 131-137, 2014 [SCI 1.167].

9. YJ Kim and Jong-Chul Lee, “Experimental and numerical studies on the behavior of magnetic nanoparticles in a

microchannel,” Materials Focus, Vol. 2, No. 4, pp. 258-262, 2013.8 [국제B].

 

 

2012

1. B.-J. Kim, K.-Y. Park, J.-H. Ahn, YJ Kim, "Numerical Design of SiO2 Bridges in Stretchable Thin Film Transistors",

Japanese Journal of Applied Physics, Vol. 51(1), pp. 01AG10-1~01AG10-3, 2012.1.20. [SCI 1.058]

2. Hyeon-Seok Seo, Bongtae Han and YJ Kim, "Numerical Study on the Mixing Performance of a Ring-Type Electroosmotic

Micromixer with Different Obstacle Configurations", J. of Nanoscience and Nanotechnology, Vol. 12, No. 6, pp. 4523-4530,

2012 [SCI 1.563].

3. Hyeon-Seok Seo and YJ Kim, “A Study on the Mixing Characteristics in a Hybrid Type Microchannel with Various Obstacle

Configurations”, Materials Research Bulletin, Vol. 47, pp. 2948-2951, 2012 [SCI 2.105].

4. YJ Kim, Jong-Chul Lee, “SF6 Arc Plasma Simulation and Breakdown Performance Prediction Using Computational Fluid

Dynamics and Arc Modeling“, Thin Solid Films, Vol. 521, pp. 206-211, 2012 [SCI 1.89].

5. JC Lee, HS Seo, YJ Kim, "The Increased Dielectric Breakdown Voltage of Transformer Oil-Based Nanofluids by an External

Magnetic Field", Int. J. of Thermal Sciences, Vol. 62, pp. 29-33, 2012 [SCIE 2.142].

 

 

2011

1. M. Bhuvaneswari, S. Sivasankaran, YJ Kim, "Magnetoconvection in an Enclosure with Sinusoidal Temperature Distributions on Both Side Walls",

Numerical Heat Transfer, Part A. Vol. 59, No. 3, pp. 167-184, 2011.2 [SCI 1.117].

2. M. Bhuvaneswari, S. Sivasankaran, YJ Kim, “Numerical Study on Double Diffusive Mixed Convection With Soret Effect in a Two-Sided Lid-Driven Cavity",

Numerical Heat Transfer, Part A, Vol. 59, No. 7, pp. 543-560, 2011.4 [SCI 1.117].

3. D.-K. Lee, K. Park, J.-H. Ahn, N.-E. Lee, and YJ Kim, “A Numerical Study on the Mechanical Characteristics of Zinc

Oxide-Based Transparent Thin Film Transistors”, J. of Nanoscience and Nanotechnology, Vol. 11, No. 7, 2011.7 [SCI 1.929].

4. Hyeon-Seok Seo, Tae-An Kim, and YJ Kim, “Numerical Analysis of the Zeta Potential regarding the Characteristics of

a Ring-Type Electro-Osmotic Mixer”, J. of Nanoscience and Nanotechnology, Vol. 11, No. 7, pp. 5985-5989, 2011.7 [SCI 1.929].

5. YG Seol, W. Heo, JS Park, NE Lee, DK Lee, YJ Kim, "Improvement of mechanical and electrical stability of flexible

organic field-effect transistors by multistack hybrid encapsulation", J. of the Electrochemical Society, 158(9), pp. H931-H936,

2011 [SCI 2.241].

6 S. Sivasankaran, M. Bhuvaneswari, YJ Kim, C.J. Ho, K.L. Pan, "Numerical study on magneto-convection of cold water in

an open cavity with variable fluid properties", Int. J. of Heat and Fluid Flow, pp. 932-942, 2011, [SCI 1.802]

7. M. Bhuvaneswari,, S. Sivasankaran, YJ Kim, "Effect of Aspect ratio on Convection in a Porous Enclosure with Partially

Active Thermal Walls", Computers and Mathematics with Applications, Vol. 62, pp. 3844-3856, 2011 [SCI 1.472]

8. J. W. Shur. W. K. Park, B. K. Kang, H. S. Seo, YJ Kim and D. H. Yoon, "Thermal characteristics of multi-crystalline Si growth

by the improved directional solidification process depending on cooling methods“, J. of Ceramic Processing Research, Vol. 12, Special 3,

pp. s193~s197, 2011. [SCI 0.481]

 

 

2010

1. JC Lee, YJ Kim, "Computational Investigation of Thermal Plasmas in a SF6 Chamber with different Applied Currents",

Modern Physics Letters B, Vol. 24, No. 13, pp. 1341-1344, 2010.6 [SCI 0.471]

2. SC Lee, DK Lee, YG Seol, JH Ahn, NE Lee, YJ Kim, "Numerical analysis on the mechanical properties of organic thin film

transistor", Modern Physics Letters B, Vol. 24, No. 13, pp. 1471-1474, 2010.6 [SCI 0.471]

3. SH Cho, HG Lee, MJ Choi, JR Kwon, YJ Kim, "The influence of Lorentz force on vacuum arc behaviors with an

axial magnetic field", Modern Physics Letters B, Vol. 24, No. 13, pp. 1483-1486, 2010.6 [SCI 0.471]

4. Kyungyea Park, Deok-Kyou Lee, Byung-Sung Kim, Haseok Jeon, Nae-Eung Lee, Dongmok Whang, Hoo-Jeong Lee, YJ Kim

and Jong-Hyun Ahn, “Stretchable, Transparent Zinc Oxide Thin Film Transistor”, Advanced Functional Materials, Vol. 20, pp. 3577-3582, 2010.10.22 [SCI 8.46].

5. Y. G. Seol, J. S. Park, N. T. Tien, N.-E. Lee*, D.-K. Lee, S.-C. Lee, YJ Kim, C.-S. Lee, H. J. Kim(Department of Electrical and Electronic

Engineering, Yonsei University),

“Reduction of electrical hysteresis in cyclically-bent organic field-effect transistors by incorporating multi-stack hybrid gate dielectrics”,

J. of The Electrochemical Society, Vol. 157, Issue 11, pp. H1046-H1050, 2010.09.23 [SCI 2.241]

6. M. Bhuvaneswari, S. Sivasankaran, YJ Kim, "Exact Analysis of Radiation convective Flow Heat and Mass Transfer over an Inclined

Plate in a Porous Medium", World Applied Sciences Journal, Vol. 10(7), pp. 774-778, 2010 [국제B].

(ISSN 1818-4952).

7. D.-K. Lee, S.-C. Lee, Y.-G. Seol, J.-H. Ahn, N.-E. Lee, and YJ Kim, “Deformation Characteristics of an Organic Thin Film Transistor”,

J. of Nanoscience and Nanotechnology, Vol. 11, No. 1, pp. 239-242, 2011.1 [SCI 1.929].

 

 

2009

1. YJ Kim, Jin-Soo Pyo, “Thermal Characteristics of Foams and Discharge from Fire-Extinguishment Foam Spray Nozzle”,

Modern Physics Letters B, Vol. 23, No. 3, pp. 381-384, [SCI 0.4].

2. J.C. Lee, YJ Kim, “The Size Effect of a Langmuir Probe into Flowing Thermal Plasma”,

Modern Physics Letters B, Vol. 23, No. 3, pp. 465-468, [SCI 0.4].

3. Tae-An Kim, Kyung-Ha Koo, and YJ Kim, "Effect of zeta potential on the performance of a ring-type electroosmotic

mixer", J. Nanosci.and Nanotechno. Vol. 9, No. 12, pp. 7303-7306, 2009.12 [SCI 1.987].

4. HS Seo, Jin-Baek Kim, YJ Kim, "The effect of blade angle on the flow and pressure distributions in the vicinity of the

diffuser blades of a room air conditioner", J. of Mechanical Science and Technology, Vol. 23, pp. 1840-1845, 2009.

[SCI 0.215].

5. Jongchul Lee, YJ Kim, "Study on the High-Intensity Free-burning Arc and Aerodynamic Disturbances" (JPICMAP200808-0031)

J. of the Korean Physical Society, Vol. 55, No. 5, pp. 1790-1793, 2009.11 [SCI 1.328]

6. JC Lee, YJ Kim, "Computational investigation on the disturbed thermal plasma for improving the reliability of

electrostatic diagnosis, Vacuum, Vol. 84, pp. 766-769, 2010.2 [SCI 1.114]

7. Seung-Hyun Kim, YJ Kim, "Flow characteristics in compact thermal spray coating systems with minimum length nozzle",

Plasma Science and Technology, Vol. 11, No. 5, pp. 550-554, 2009.10 [SCI 0.4].

 

 

2008

1. I.-S. Bae, S.-J. Cho, W.-S. Choi, B.-Y. Hong, YJ Kim, Y.-M. Kim, JH Boo, "Electrical, mechanical, and optical properties of

the organic-inorganic hybrid-polymer thin films deposited by PECVD", Thin Solid Films, Vol. 516, pp. 3577-3581.

2008.4 [ISBN 0040-6090].[SCI 1.693].

2. Jae-Sang Baik, Sun-Kyu Park and YJ Kim, “A Numerical Study on the Gas Phase Dynamics of the HVOF Thermal

Spray”, The Japanese Journal of Applied Physics (JJAP), Vol. 47, No. 8, pp. 6907-6909, 2008. [SCI 1.247].

3. JH Kim, JH Boo, YJ Kim, "Effect of stage control parameters on the FIB milling process", Thin Solid Films, Vol. 516,

No. 19, pp. 6710-6714, 2008.8 [ISBN 0040-6090] [SCI 1.666].

4. YJ Kim, "Flow Characteristic of a Electrically Conducting Micropolar Fluid Over a Moving Porous Plate", Functional

Materials Letters, Vol.1, No.1, pp. 83-89, 2008.8.

5. Kyoil Hwang, Suk-Han Lee, YJ Kim, HM Kim, "Control of line width with active nano fountain pen (ANFP) for nano

manufacturing", J. of Mechanical Science and Technology, Vol. 22, pp. 1339-1348, 2008.8. [SCI 0.215].

6. Jae-Sang Baik and YJ Kim, "Effect of Nozzle Shape on the Performance of High Velocity Oxygen-Fuel Thermal Spray

System", Surface & Coatings Technology, Vol. 202, pp. 5457-5462, 2008.8. [SCI 1.678]

7. D.-G. Yoo, S.-H. Nam, M. H. Kim, S. H. Jeong, H.-G. Jee, H.J. Lee, N.-E. Lee, B.Y. Hong, YJ Kim, D. Jung, J.-H. Boo,

"Fabrication of the ZnO thin films using wet-chemical etching processes on application for organic light emitting diode

(OLED) devices", Surface & Coatings Technology, Vol. 202, pp. 5476-5479, 2008.8. [SCI 1.678]

8. Jung-Hoon Hwang and YJ Kim, "Pumping Characteristics of a Helical Screw Agitator with a Draught Tube",

J. of Fluid Science and Technology, Vol. 3, No. 6, pp. 713-721, 2008.9 [국제B].

9. Tae-An Kim, D.-W. Kim, S.-K. Park, and YJ Kim, "Performance of a cross-flow fan with various shapes of a

rearguider and an exit duct", J. of Mechanical Science and Technology, Vol. 22, pp. 1876-1882, 2008.10. [SCI 0.215]

10. JH Kim, YJ Kim, "The Influence of On-Stage Control Parameters on Patterning in the FIB Deposition Process“,

J. of the Korean Physical Society, Vol. 53, No. 5, pp. 2596-2602, 2008.11 [SCI 1.328].

 

 

2007

1. Jong-Chul Lee, Jin-Hyo Boo, YJ Kim, "Changes of Electrical Conductivity and Temperature Caused by Electrodes Erosion for

Atmospheric Plasma Systems", J. of the Korean Physical Society, Vol. 51, No. 3, pp. 972-977, 2007.9. [SCI 1.328]

2. Jae-Sang Baik, YJ Kim, Jong-Chul Lee, Jin-Hyo Boo, "Characteristics of Thermal-Flow Fields in the PECVD Reactor with

Various Operating Conditions", J. of the Korean Physical Society, Vol. 51, No. 3, pp. 1113-1118, 2007.9. [SCI 1.328]

3. Jae-Sang Baik, Jin-Hyo Boo, YJ Kim, "Effects of operating conditions on the deposition of GaAs in a vertical CVD reactor",

Surface Review and Letters, Vol. 15, Nos.1&2 (2008) 111-116. [SCI 0.439]

 

 

2006

1. Kyung Ho Jung, Yong-Seob, JH Boo, YJ Kim, BY Hong, "Characteristics of carbonaceous materials with nanotubes grown by

hot-filament plasma-enhanced chemical vapor deposition method," Thin Solid Films, Vol. 501, pp. 238-242. 2006.3

[SCI 1.598] ISBN 0040-6090.

2. JC Lee, TA Kim, YJ Kim, "Optimization of thermal puffer chambers using multidisciplinary simulation techniques", Flow

Dynamics, The 2nd International Conference on Flow Dynamics, Sendai, Japan, 2005.11.16-11.18, edited by Michio Tokuyama

and Shigenao Maruyama, AIP Conference Proceedings (832), pp. 389-396.[국제 B]. (ISBN 0-7354-0324-4, ISSN 0094-243X).

3. Young-Kwan Lee, Jin-Hyoung Lee, Sung-Kun Lee, Suk-Han Lee, YJ Kim, Hunmo Kim, "Nano Manufacturing Using

Fountain Pen Nano-lithography with Active Membrane Pumping", Key Engineering Materials, Vols. 326-328, pp. 425-428,

2006.9.[SCI 0.284].

4. Kwang-Su Kim and YJ Kim, "Experimental Study on the Film Cooling Performance at the Leading Edge of Turbine

Blade Using Infrared Thermography", Key Engineering Materials, Vols. 326-328, pp. 1161-1164, 2006.9. [SCI 0.284]

5. Jong-Chul Lee & YJ Kim, "The influence of metal vapors resulting from electrode evaporation in a thermal puffer type

circuit breaker", Vacuum, Vol. 81, pp. 875-882, 2007.2 [SCI 0.612]

6. Jong-Chul Lee & YJ Kim, "SF6 Arc Plasmas Modelling for Compact and Environmental-Friendly GCB",

Surface & Coatings Technology, Vol. 201, pp. 5641-5645, 2007.2 [SCI 1.41]

7. YJ Kim & Kwang-Su Kim, “Boundary Layer Flow of Micropolar Fluids past an Impulsively Started Infinite Vertical Plate (#2950)”,

Physica Scripta, Vol. 75, pp. 132-137, 2007.1 [SCI 0.688]

 

 

2005

1. I.-S. Bae, S.-H. Cho, S.-B. Lee, YJ Kim, J.Boo, “Growth of plasma-polymerized thin films by PECVD method and study on

their surface and optical characteristics", Surface & Coatings Technology, Vol. 193, pp. 142-146, 2005.4 [SCI 1.41].

2. Jong-Chul Lee and YJ Kim, “Calculation of the Interruption Process of a Self-blast Circuit Breaker”,

IEEE Transactions on Magnetics, Vol. 41, No. 5, pp. 1592-1595, 2005.5 [SCI 1.006].

3. YJ Kim, J-H Moon, S-K Park, S-K Oh, "Development of computer-aided design program for refrigerator duct systems",

ASHRAE Transactions: Research, pp. 282-290, 2005.5 [국제B]

4. YJ Kim & HS Kim, "Functional assessment of an anti-abrasive elbow for particle-laden gas flows", Key Engineering Materials

Vol. 297-300, pp. 2345-2350, 2005.11, [SCI 0.284].

5. IJ Hwang, YJ Kim, "Measurement of Thermo-acoustic Waves Induced by Rapid Heating of Nickel Sheet in Open and

Confined Spaces", Int. J. of Heat Mass Transfer, Vol. 49/3-4, pp. 575-581, 2005.11 [SCI 1.293]

6. JC Lee, YJ Kim, "Effects of nozzle shape on the interruption performance of thermal puffer type circuit breakers", Vacuum,

Vol. 80/6, pp. 599-603, 2005.11.1 [SCI 0.902].

7. KS Kim, HM Kim, YJ Kim, "Analysis of Thermal Stress and Flow Characteristics in A Bellows-Seal Valve for

the Reliability Establishment", Solid State Phenomena, Vol. 120, pp. 141-146, 2007.1, [SCI 0.687].

 

 

2004

1. YJ Kim and S.-M. Kim, "Influence of Shaped Injection Holes on Turbine Blade Leading Edge Film Cooling",　

Int. J. of Heat and Mass Transfer. Vol. 47, No. 2, pp. 245-256, 2004.1. [SCI 1.293]

2. YJ Kim and TA Kim, "A Study on the Plane Couette Flow Using Micropolar Fluid Theory",

KSME Int. J., Vol. 18, No. 3, pp. 491-498, 2004.3.1 [SCI 0.272]

3. YJ Kim, "Heat and Mass Transfer in MHD Micropolar Flow over a Vertical Moving Porous Plate in a Porous Medium",

Transport in Porous Media, Vol. 56, No. 1, pp. 17-37, 2004.7 [SCI 0.848]

4. MC Kim, SH Cho, SB Lee, YJ Kim, JH Boo, "Characterization of polymer-like thin films deposited on silicon and glass

substrates using PECVD method", Thin Solid Films, Vol. 447-448, pp. 592-598 [SCI 1.598]

5. YJ Kim, J.-H. Boo, B.-Y. Hong and Youn J. Kim, "Effects of showerhead shapes on the flowfields in a RF-PECVD

reactor", Surface & Coatings Technology, Vol. 193/1-3, pp. 88-93, 2004. [SCI 1.41]

6. JC Lee, YJ Kim, "Numerical modeling of SF6 thermal plasma generated during the switching process", Thin Solid Films, Vol.

475/1-2 pp. 72-80, 2004. [SCI 1.598].

7. JH Moon, JG Han, YJ Kim, "Performance of an atmospheric plasma torch with various inlet angles", Surface & Coatings

Technology, Vol. 193/1-3 pp. 94-100, 2004. [SCI 1.41].